KS-9000 Full Spectrum Direct Reading Spectrometer

Introduction:
KS-9000 full-spectrum direct-reading spectrometer adopts international standard design and manufacturing technology, adopts all-digital technology, instead of huge photomultiplier tube(PMT) analog technology, synchronized with international spectrometer technology, adopts vacuum optical chamber design and all-digital excitation The light source, the leading CCD detector, and the high-speed data read-out system make the instrument have extremely high performance, extremely low detection line, long-term stability and repeatability.
Application:

Various analysis in metallurgy, foundry, machinery, scientific research, commodity inspection, automobile, petrochemical, shipbuilding, electric power, aviation, nuclear power, metal and non-ferrous metal smelting, processing and recycling industries.

Technology parameter:

Item		Index
Optical System	Focal Length	400mm
	Wavelength range	130nm-800nm
	Detector	High resolution CCD Multi detectors
	Degree of vacuum	Auto control within 6-20 pa
	Pixel resolution	30pm
	Grating line	2400m1/mm
	First order spectral line dispersion rare	1.2nm/mm
	Average resolution ratio	10pm/pixel
	Full spectrum
	Light room temperature is controlled automatically
Spark Source	Type	Digital arc and spark source
	Spark frequency	100-1000HZ
	Discharge current	1-400A
	Ignition voltage	>15000V
	Excitation light	Optimization of discharge parameters design
		High energy precombustion technology HEPS
	Processor	High-speed data synchronization acquisition and processing
Spark Stand	Electrode	Tungsten electrode technology
	Make up	Thermal deformation self-compensation design
	Argon flushed with minimal consumption of Argon
	Spray discharge electrode technology
	Adjustable electrode technology
Others	Measurable elements	Fe、Al、Cu、Ni、Ti、Co、Zn、Sn、Mg、Pb etc
	Dimension	800mm(L)*700mm*470mm(H)
	weight	About 100kg
	Storage temperature	0℃-45℃
	Operating temperature	10℃-35℃, 23±2℃ is recommended
	Power	AC220V/50Hz(Customized)
	Power consumption	Excitation:700W/Stand by:100W
	Argon quality	99.999%, Argon pressure>4Mpa
	Argon consumption	5L/min during spark mode
	Interface	Ethernet data transmission based on DM9000A